-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Pontiac > Grand Prix
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 03-03-2005, 05:46 PM
ponypal2 ponypal2 is offline
AF Newbie
 
Join Date: Jan 2005
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Cool HUD problems

I have a 98 gtp and my wife has a 00 gtp and both of hud's fade out after driving for awhile. Are there any remedies I can do for this or replacement is necessary?
Reply With Quote
  #2  
Old 03-03-2005, 06:34 PM
BIG-L's Avatar
BIG-L BIG-L is offline
AF Enthusiast
 
Join Date: May 2004
Posts: 1,160
Thanks: 0
Thanked 0 Times in 0 Posts
This fix should take care of your fading problem



1. Remove HUD from car.
2. Remove 4 Torix screws from top of HUD
3. Remove ribbon cable and small 2-wire cable from circuit board.
4. Remove circuit board.
5. On the board there is a small photocell, the problem is that the cell has a cold solder joint. The cell is a 1/3-inch
Circle with a black square in the center. All you need to do is resolder the two legs.
6. Put everything back.

I was unable to find a replacement cell at radio shack.
The cell produces a small amount of voltage. The more light the more voltage. 0-.75 volts. My cell was working fine but the joint was loose. When the board heated up it lost the joint increased resistance to the point that the HUD lost the voltage reference.Hope this helps....~Larry~




__________________

ClubGP Member 6530
Since 2001
Reply With Quote
  #3  
Old 08-19-2005, 09:38 AM
Bassett72 Bassett72 is offline
AF Newbie
 
Join Date: Sep 2003
Posts: 38
Thanks: 0
Thanked 0 Times in 0 Posts
Can someone provide instructions on how to take the HUD out? Thanks
Reply With Quote
  #4  
Old 10-04-2005, 09:29 PM
thatnigga thatnigga is offline
AF Newbie
 
Join Date: Oct 2005
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
Re: HUD problems

I have a 2001 with the exact same problem. But my board doesn't look anything like this......has anyone seen this is a 01 GP?
Reply With Quote
  #5  
Old 11-22-2005, 05:04 PM
tiggerluke tiggerluke is offline
AF Newbie
 
Join Date: Nov 2005
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Re: HUD problems

Quote:
Originally Posted by BIG-L
This fix should take care of your fading problem



1. Remove HUD from car.
2. Remove 4 Torix screws from top of HUD
3. Remove ribbon cable and small 2-wire cable from circuit board.
4. Remove circuit board.
5. On the board there is a small photocell, the problem is that the cell has a cold solder joint. The cell is a 1/3-inch
Circle with a black square in the center. All you need to do is resolder the two legs.
6. Put everything back.

I was unable to find a replacement cell at radio shack.
The cell produces a small amount of voltage. The more light the more voltage. 0-.75 volts. My cell was working fine but the joint was loose. When the board heated up it lost the joint increased resistance to the point that the HUD lost the voltage reference.Hope this helps....~Larry~





HEY BIG-L Thanks for the great info. However, the URL's for the images nolonger exist.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Pontiac > Grand Prix


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:59 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts