92 suburban 4 x 4 hose diagram

[BUTCH613]

i am replacing the fuel tank and pump at the same time as well as the hard lines going to the pump. they were rotted from someone putting a boat in the water. my issue is i have to valves in the top of the tank both new but i need a diagram of where they connect to? i know they hook together but then to where? if someone has a diagram or info please drop me a line. [email protected]

much appreciated and i look forward to contributing in the future.
butch

[MT-2500]

Originally Posted by BUTCH613

i am replacing the fuel tank and pump at the same time as well as the hard lines going to the pump. they were rotted from someone putting a boat in the water. my issue is i have to valves in the top of the tank both new but i need a diagram of where they connect to? i know they hook together but then to where? if someone has a diagram or info please drop me a line. [email protected]

much appreciated and i look forward to contributing in the future.
butch

If no readable vacuum diagram under hood.
Depends on trans and engine and transfer case and sub size 4W or 2W and if fed or calf emissions.
Factory repair manual or a.
http://www.alldata.com/products/diy/index.html
AZ web site ma have some info on it.
Most good Repair shops have them.
For a fee they usually will help you out.
Some public libraries have car repair info.
Also GM dealer may have it in there computer.