|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Cavalier Problem Diagnosis Got a problem you can't fix? We can help. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-19-2008, 01:03 PM
|
|||
|
|||
|
Cavalier shifter cable problem
Does anyone make an aftermarket shifter cable end for a 94 Cavalier. The cable is disconnected from the shifter and the dealership says I must buy a new cable at $160.00. I know someone is selling an aftermarket end (grommet) that replaces the worn one without buying the whole new cable. Does anyone have a suggestion, or should I drill the stud on the bottom of the shifter and use a washer and cotter pin?
|
|
#2
07-19-2008, 08:13 PM
|
||||
|
||||
|
Re: Cavalier shifter cable problem
absolutely no one makes any after market shift cables for our cars...
Get the P/N from the dealer, and order it through www.gmpartsdirect.com
__________________
Please don't PM me with your J-body Issues. Post appropriately in the forums, and I will toss my opinion in your thread if I have anything to help. - Thanks! 2006 Chevrolet Trailblazer 2010 Glastron GT 205XL
|
|
#3
01-14-2010, 05:16 PM
|
|||
|
|||
|
Re: Cavalier shifter cable problem
Clean the cable end cup. Cover small hole with tape. Mix well J-B Weld epoxy and fill cup with it. Put some light oil on trans level pin (the small pin with ball at end to prevent it from stickin to the epoxy). Tie with tape with trans lever pin inside (as its supposed to be). Let it set overnight. Better than new. Tie loosely a small piece of wire holding cable end and trans level together as assurance.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
