b16 into 5g cx hatch

[big tex84]

ok ive been searching but cant find a couple of specifics i need for this swap, i need to know if i have to swap out the hubs of the cx for some from a dx, also when i did my 4g swap I had to get a rear tranny bracket, but i can remember what integra it came from, so which one do I use, one more thing, what year teg axles do i use for this swap? any help is much appreciated

[CivicSpoon]

You use your stock hubs. You need the driver's side mount (check to see if the bracket attached to the engine has 2 bolts or 3 bolts and match it to the mount you need), the rear mount bracket, and axles from a '94-'01 Integra.

[big tex84]

thanks man i really appreciate the response.

[ghostcivic]

Originally Posted by CivicSpoon

You use your stock hubs. You need the driver's side mount (check to see if the bracket attached to the engine has 2 bolts or 3 bolts and match it to the mount you need), the rear mount bracket, and axles from a '94-'01 Integra.

just what i would have said