 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
12-26-2009, 12:32 PM
|
#1 | |
|
AF Newbie
Join Date: Jul 2009
Location: greenwich, Ohio
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
4.3 lifter torque
i have just replaced a blown head gasket cleaned and re-installed original lifters and pushrods in the same position as well as the rockers, torqued them to 18 ft.# went to start had no compression , loosen rockers turned over motor now have compression . what was wrong did i use the proper torque setting is there a sequence for tightening? 2000 olds bravada 4.3l vin ''W'' roller cam and rockers w/ positive stop shoulder bolts.
|
|
|
|
|
12-26-2009, 05:18 PM
|
#2 | |
|
AF - Advisor
 
Join Date: Sep 2005
Location: New London, Missouri
Posts: 16,690
Thanks: 5
Thanked 121 Times in 120 Posts
|
Re: 4.3 lifter torque
Try tighting them slow or a little at a time.
__________________
Remember proper testing gives us the answer to many problems. MT |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
