|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#2
04-19-2004, 06:35 PM
|
||||
|
||||
|
Re: Door panel removal
Good question, i have a rattle in my driver door that needs attention...
Anyone done this?
__________________
1997 Aurora "Aurora Snow" 250++HP 4.0L Modified Aurora V8 w/Autobahn Performance On Deck: RSM intake, RSM 80mm TB  Administrator, www.oldsmobileforums.com Administrator,Aurora Club of North America Administrator, www.bonnevilleclub.com Adminstrator, www.ontariobonnevilleclub.com Coming Soon 
|
|
#3
04-19-2004, 08:47 PM
|
||||
|
||||
|
Re: Door panel removal
remove the little cover behind the interior door handle, remove newly exposed screw.
Remove screws at the very bottom of the door panel, now lift the panel UP, NOT out. Once lifted disconnect the wiring. Warning, if you pull out on the door before freeing it by lifting it you'll destroy it.
|
|
#4
04-22-2004, 10:29 AM
|
||||
|
||||
|
Re: Door panel removal
Awesome..thanks
|
|
#6
04-24-2004, 12:35 AM
|
||||
|
||||
|
Re: Door panel removal
LOL..yep yer bang on there, I found a solution to the rattle.
Turn up the stereo 
__________________
1997 Aurora "Aurora Snow" 250++HP 4.0L Modified Aurora V8 w/Autobahn Performance On Deck: RSM intake, RSM 80mm TB Administrator, www.oldsmobileforums.com Administrator,Aurora Club of North America Administrator, www.bonnevilleclub.com Adminstrator, www.ontariobonnevilleclub.com Coming Soon
|
|
#7
07-27-2009, 12:29 PM
|
|||
|
|||
|
Re: Door panel removal
FYI To remove the little round access cover behind the door handle, pry at the top of it to avoid breaking it. Once you remove the phillips head screw, you have to remove the oval shaped plastic piece from behind the door handle also.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
