 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-02-2003, 11:54 AM
|
#1 | |
|
AF Newbie
Join Date: Feb 2003
Posts: 40
Thanks: 0
Thanked 0 Times in 0 Posts
|
Vtec Wiring Question
Ok i posted here a while back asking questions regarding my mini me swap.
engine is d16y7 block(97dx), d16y8 head(98ex), have a 98 ex ecu, and the car is an automatic i had used the EX harness the guy i bought my head and IM off of but something f'd up on it(long story, short version, took car out, car was revving from 0 to 6k and back and forth real quick while i was driving, sputtering and coming close to stalling, was something electrical) so i replaced the EX harness with my DX harness. I then took the vtec wires from the ex harness(cut it apart so it still had the plugs on the end of the wires so i wouldnt have to solder them) but where do i run them too? anyone have a diagram or can help me out? like which color wire goes to which spot on the plug? thanks so much i can answer any questions, i just wanna get my car running fine.  |
|
|
|
|
04-02-2003, 02:51 PM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Feb 2003
Posts: 40
Thanks: 0
Thanked 0 Times in 0 Posts
|
does anyone know? i cant find anything anywhere
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
|
POST REPLY TO THIS THREAD |
 |
|
|
