|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-06-2009, 03:47 PM
|
|||
|
|||
|
Gotta' pull the blower, '98 Jimmy 4.3. Tips?
I got that 'on-again-off-again' blower, with the loose part in the blower housing. Supposedly a common problem - give the housing a light knock, and the fan starts back up.
Any tips for pulling it? Links? Thanks... 
|
|
#2
03-06-2009, 08:55 PM
|
||||
|
||||
|
Re: Gotta' pull the blower, '98 Jimmy 4.3. Tips?
Disconnect negative battery cable. Remove VCM. Remove coolant reservoir. Remove the rear coolant reservoir mounting stud. Remove the blower motor access cover screws. Cut through the cover on "cut line" using a utility knife. Disconnect the cooling tube from the blower motor. Disconnect the electrical connector from the blower motor. Remove the blower motor mounting screws. Remove the blower motor. Install an AC Delco blower motor
 and reassemble. Those are the only tips and there are no shortcuts.
__________________
You have to know how it works, to figure out why it doesn't.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
