radiatior & front hub

[perla]

does anybodyknow how to replace the radiator & front hub in a 2000 pontaic montana

[marks1591]

for the hub get a 30 mm socket remove large nut on shaft the remove break caliper then rotor should come off then turn streering wheel to the right or left depending on what hub you are doing and remove the 3 bolts behind hub then use hammer comes off easy well mine did

[mhall02]

Good thread on hub replacement:

http://www.automotiveforums.com/vbul...ht=hub+bearing

Don't know about radiator, may be that same boat soon. Don't know if it is the upper hose, where it hooks into the rad or the acutal rad yet. So far a very very small leak.

[perla]

Originally Posted by mhall02

Good thread on hub replacement:

http://www.automotiveforums.com/vbul...ht=hub+bearing

Don't know about radiator, may be that same boat soon. Don't know if it is the upper hose, where it hooks into the rad or the acutal rad yet. So far a very very small leak.

Thanks for the thread on the hub replacement. took care of it buy the way I bought my radiator in ebay for $94 plus shiping it was a good deal