|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-03-2008, 02:15 PM
|
|||
|
|||
Removing Bed
I need to replace the fuel pump in my '98 and have decided to remove the bed. So for those of you who have tackled this job, how do I get to the bolt that is behind the tank without dropping the tank anyway? I stopped in my tracks and came right here. Thanks.
Last edited by Arrowshooter; 08-03-2008 at 02:17 PM. Reason: Added question mark 
|
|
#3
08-03-2008, 06:39 PM
|
||||
|
||||
|
Re: Removing Bed
Did they leave you enough room to get a wrench on it or a long extension with a flex socket?
Let us know how it goes. Good luck
__________________
Remember proper testing gives us the answer to many problems. MT
|
|
#4
08-04-2008, 12:41 AM
|
|||
|
|||
|
Re: Removing Bed
I started in the back and the hitch was covering the holes in the bottom of the frame so I assumed there were no holes. Well, there are holes and the bed is off. Took all of ten minutes to get it off. Thanks for the replies though.
|
|
#5
08-04-2008, 11:39 AM
|
||||
|
||||
|
Re: Removing Bed
You are welcome .
And thanks for posting back what you found. Glad you got it figured out. Good luck MT
__________________
Remember proper testing gives us the answer to many problems. MT
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
