|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Engineering/ Technical Ask technical questions about cars. Do you know how a car engine works? |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-08-2003, 07:03 PM
|
|||
|
|||
DOHC ZC Head questions!
I need to know what parts are the same in the D16A1 head. Dont guess if you dont know for sure. I want NEW springs/valves/retainers/guides anything NEW I can get my hands on for the ZC.
|
|
#3
03-08-2003, 09:27 PM
|
|||
|
|||
|
The DOHC ZC... There is only one DOHC ZC that says ZC on it. Its from japan! Does that help?
|
|
#4
03-09-2003, 03:03 PM
|
|||
|
|||
|
There are more than one DOHC ZC,there is one with a olive colored valve cover and two with black.Anyway you can use D16A1 parts.What do you want to know?what to use for higher compression,aftermarket parts?
__________________
 
|
|
#5
03-09-2003, 08:11 PM
|
|||
|
|||
|
Well here is the deal, It is a black top zc... It does not have the date between the exaust ports (Maybe you can shine some light on that) I am using EnDyn 11.16:1 pistons and eagle rods (I will have to notch the blocks for the rods and bore it to 1.7L for the pistons)
I want to use the HKS new billet camshafts but I dont know if they will fit... So I will probably get crower to hardweld and regrind them. I need new valves, springs, retainers, guides AND MOST IMPORTANTLY I need new rocker arms!
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
