|
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| Performance Discuss Engine, Suspension, Drivetrain, and all other performance modifications here. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Nov 2006
Location: Denare Beach
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
S15 V8 Swap Drivetrain
I have an '88 S15 with a 2.5L 5 spd, I am going to be swapping the engine for a 305/350 soon and i was wondering if it is possible to put a half ton diff in the rear and if there is enough room underneath for the standard tranny that comes with the motor?
|
|
|
|
|
|
|
#2 | |
|
AF Newbie
Join Date: Mar 2008
Location: Stillman Valley, Illinois
Posts: 92
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: S15 V8 Swap Drivetrain
The engine and trans won't be a problem. Never tried swapping rear ends but anything is possible.might have to cut the tubes and shorten the axles.
|
|
|
|
|
|
|
#3 | |
|
GM S-Series Mod
![]() Join Date: Aug 2005
Location: Westminster, Maryland
Posts: 2,650
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: S15 V8 Swap Drivetrain
There are kits availible with V8 swap motor mounts, headers, exc. Use at least a 350 to make the swap worth while. I would use a T-5 trans if you plan on staying with a stick shift and are using a mild V8 unless you plan on swapping to an automatic. Yes, an 8.5in 10bolt from a half ton can be used but it has to be narrowed. Try finding one from a ZR2 as they use a narrowed 8.5in 10 bolt from the factory that had 3.73 gears and a limited slip.
__________________
2000 Chevy Blazer ZR2 Performance Mods: Numerous Suspension Mods: Some, but not enough Exterior Mods: Just Right 1987 Buick Turbo T Dark Red Low 11 sec sleeper ![]() .030 4.1 block, PT6262E, & other odds and ends.... My Cardomain |
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|