Where is the PFE Hose?

Wide_Track · 04-06-2008, 10:35 PM

Hi,

I have a 1995 Villager. I trying to locate the Pressure Feedback EGR hose. I was told it needed one.

Thanks in advance,

Nu_Sky

tempfixit · 04-07-2008, 01:12 AM

I believe you are referring to the BPT hose.

Facing the vehicle from the front look on the backside of the plenum and the firewall on the driver side. The BPT hose is about 1/2" OD about 6 inches long. It goes from the EGR valve to the EGR Backpressure Transducer Control.

It is kinda a PITA to get to.

Wide_Track · 04-14-2008, 11:43 AM

Hi tempfixit,

I appreciate the help. I am not sure if it is the same. I know the BPT hose is related the fairly common check engine light problem. The light not on...repaired years ago. I will check it out.

Thanks again,

Nu_Sky

Johnny Mullet · 04-14-2008, 10:22 PM

DPFE Hose?

These are small hoses that come off of the exhaust manifold to a sensor. These hoses are special hi-temp rubber also.

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD