specs

[cmjrbking123]

any one know the specs for the tranny bolts. refill and drain bolt for
crx si?


thanks.

[kris]

For what, the torque specs, or the thread pitch? Did you lose the plugs?

[Christ]

torque spec == until you can't turn it w/ a 3/8 ratchet... but not insanely tight. I think it's somethin like 80 lb-ft

The lugnuts are only like 81 lb-ft, so it can't be much more than that.

[FrodoGT]

tranny bolts I believe are like 60 lb. The fill and drain plug should be about 1/4 past snug..no real tq spec necessary, just enough to be able to loosen it ever again.

[BLU CIVIC]

Originally Posted by kris

Did you lose the plugs?

that's what i'm thinking