$ Question ?

italia · 10-10-2001, 09:26 AM

I would like to know how much it cost to lower a P11? The total price including the springs and installation.
Thanks

Nismoboy1 · 10-10-2001, 09:55 AM

hmmm....anywhere from $200-$2000, depending on what brands you want and what you want out of it, performance and comfort-wise. Please be more specific, btw whats your budget???

italia · 10-10-2001, 12:10 PM

I'm not looking for the best out of preformence, but i also dont want something that will ruin the car. I want to lower it a little more then an inch. Im looking to spend less then a grand, what are my choices (springs and instalation) ?

Mrcoilover · 10-10-2001, 01:24 PM

Since my name is MrCoilover I will reply. You don't have many
options here. For a little more than an 1" you should go with either Eibach's or H&R. I have heard people put one or the other on with no
aftermarket struts and say it rides fine. I personally would get the struts with them. Problem is, is that nobody makes a full strut setup to go with the springs. These run about $200. Or you could get the Tien type NA. This includes spring and shock in one. Can adjust height when installing and can adjust softness of the ride with a certain "click tool". The Tien type NA's run about $1100 shipped to your door from Luke at www.digitalracer.com

and there you have it.:toothless

AznVirus · 10-10-2001, 06:17 PM

Quote:

Originally posted by Mrcoilover
Since my name is MrCoilover I will reply. You don't have many
options here. For a little more than an 1" you should go with either Eibach's or H&R. I have heard people put one or the other on with no
aftermarket struts and say it rides fine. I personally would get the struts with them. Problem is, is that nobody makes a full strut setup to go with the springs. These run about $200. Or you could get the Tien type NA. This includes spring and shock in one. Can adjust height when installing and can adjust softness of the ride with a certain "click tool". The Tien type NA's run about $1100 shipped to your door from Luke at www.digitalracer.com

and there you have it.:toothless

you can mix n match the shocks am i right? which shocks are available for the P11?

Mrcoilover · 10-10-2001, 06:19 PM

Quote:

Originally posted by AznVirus

you can mix n match the shocks am i right? which shocks are available for the P11?

only KYB or GAB. KYB is mix and matched-2 fronts Maxima rears.
Gab-if you could only get em.

apintojr · 10-10-2001, 06:30 PM

it should cost anywere from 1000 to 2000.
if u go with springs and shocks it should be around 1,000 to 1,200 depending on brands.

full coil-over set up will run from 1500 to 2000 depending on brand.
B&G make good coil overs but price is 1800

italia · 10-11-2001, 10:56 AM

How much will instalation run me?

Mrcoilover · 10-11-2001, 11:06 AM

Your local import shop should charge about $100. That is what is for me. Should take a couple of hours or so.

italia · 10-12-2001, 01:05 PM

$ 100 is install springs?? for some reason i was tought it was a lot more than that...

Mrcoilover · 10-12-2001, 01:51 PM

Quote:

Originally posted by italia
$ 100 is install springs?? for some reason i was tought it was a lot more than that...

Nah brah. If you go to a service station or dealership they would surely
charge you an arm/leg. But, if you car to a import shop, dey should do it for $100. If not, tell them "MRCOILOVER said he got his installed for that and if you don't your a dickhead.":grey:

AznVirus · 10-13-2001, 05:29 AM

i contacted KYB and they said they are looking into the P11 suspension to create a full set, front and rear. they will get back to me when they dont. dont think it will be anytime soon though:o

Mrcoilover · 10-13-2001, 09:43 AM

Quote:

Originally posted by AznVirus
i contacted KYB and they said they are looking into the P11 suspension to create a full set, front and rear. they will get back to me when they dont. dont think it will be anytime soon though:o

Too bad they are only looking into it. he he

Nismoboy1 · 10-13-2001, 02:30 PM

its not that hard for them to make a full set. just use 91-96 g20 AGX's in the front and 95-99 Maxima AGX's in the rear and that's it, not very hard, just that the maxima rears are backorder at several places to buy online.

P10DET · 10-13-2001, 05:06 PM

Quote:

Originally posted by italia
How much will instalation run me?

About 4-6 hours of your time.

It's not hard.

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD