b16a mod list some help?

[Crxce]

Im dropping a b16a sir1 into my 88 rex im getting the motor and not installing it for like 2 months what kind of bolt on mods and complete service should i do to the engine? thanks you

[Civic Jim]

how much you wanna spend, if its only bolt ons just get a Intake, header, exhaust, but you may as well change the cam belt and give a good once over before you wack it in

[mellowboy]

It depends what u want to do? Go all motor or turbo? If you want basic bolt ons and later u want to go turbo. Just save up and go turbo. IF not then i would get this...dc sports jdm header with dc or thermal cat back. Intake i would get aem i guess? Get an ITR throttle body and skunk2 manifold. Your car will be decent with that set up.

[Crxce]

With that setup how much horse would i be pushing

[mellowboy]

Originally posted by Crxce
With that setup how much horse would i be pushing

It really depends on tuning man. Its really hard to say. Get a v-tec controller along with it. I bet you'll hit low 14's with that set up.

[crxlvr]

he should hit low 14's with just the engine alone in the crx, if anything he should hit 13.9-14.1 range.

but im doing the same thing as you, i got the motor and now im building it up.

ive got DC Headers 4-2-1, Apex Exhuast, Catco High Flow Cat, CTR Cams, Titanium retainers, Dual Valve Springs, Stainless Steel Valves, CTR pistons, and eagle rods.

[mellowboy]

Originally posted by crxlvr
he should hit low 14's with just the engine alone in the crx, if anything he should hit 13.9-14.1 range.

Nope. High 14s bone stock b16. With i/h/e should hit mid 14's.