|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-06-2007, 05:23 AM
|
|||
|
|||
|
No spark.
so i just replaced my 1999 GMC 5.7 K1500 suburban engine this past week and im 99% sure everything it pluged in ( im missing the knock sensor) but other then that everything is good. is their anything you guys would suggest to check for spark? i have 12v at the coil and the distributor with the key turned onto the ON position, and good grounds. just wanted to know if their was something that i might to know about lil key less entry stopping it or something stupid thanks for your help.
|
|
#2
12-08-2007, 07:44 AM
|
|||
|
|||
|
Re: No spark.
Is the security light coming on and staying on more then 10 seconds after you turn the key to the on position? If so, do a search for the reset procedure of your Passlock system.
|
|
#3
12-08-2007, 10:22 AM
|
||||
|
||||
|
Re: No spark.
Spark is trigered by crankshaft sensor on front of engine.
Is it pluged in and working good? ALSO GO OVER AND CHECK ALL FUSES AND POWER FEEDS AND GROUNDS.
__________________
Remember proper testing gives us the answer to many problems. MT
|
|
#4
12-08-2007, 01:26 PM
|
|||
|
|||
|
Re: No spark.
yes well i know its pluged in now if it is good i dunno ill re-check that today. and yes i have already check them all under the hood any where else i should check fuse/relay wise?
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
