|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
need help..
tryin to take out the back seats of my 91' civic hatch.
i took out the bottom cushin so far but i cant find out how to get the rest of it out. |
|
#2
|
||||
|
||||
|
Re: need help..
pull the handles on the tops of the seat, pull down the seat, then push the left one down towards the bottom of the seat all the way to the left. so you are bacically moving the entire seat to the left. and pull from the bottom. it should swing the seat out. then just do the same for the other side.
|
|
#3
|
|||
|
|||
|
Re: need help..
and you did remove the one bolt on the back of the seat right?
|
|
#4
|
||||
|
||||
|
Re: need help..
Both of you missed the one little black clip that holds the back part of the seats in. I believe its your left(drivers) side of the seat that has it. Fold the seats down and move the left one over to the left, look in between both seats at the hinge and you should see this little black spacer thing, pull it out and take your seats out. Might actually be on both of them, been forever since I have had a back seat in my hatch, so I don't have a clue.
__________________
Tony 91 Civic Sedan DX - Stock 287k Miles |
|
#5
|
|||
|
|||
|
Re: need help..
yeah it had a black clip on both sides thanks
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|