|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
TPS on a 91 Park Avenue
Service engine light on my 91 PA came on over the weekend, My Code scanner says it is a code 22 which is low TPS. Manual says that a dealer has to install this part and adjust it. Is this correct. What is to adjust?
|
|
#2
|
||||
|
||||
|
Re: TPS on a 91 Park Avenue
Does your scanner have the ability to display the sensor output voltage?
|
|
#3
|
|||
|
|||
|
Re: TPS on a 91 Park Avenue
Yes it does. I just realized that and should have know it, but I have been in Iraq for the past year and have not used it at all. It should tell me where to set the voltage. I believe it should be around .040
|
|
#4
|
|||
|
|||
|
Re: TPS on a 91 Park Avenue
.4 volts at idle.
|
|
#5
|
|||
|
|||
|
Re: TPS on a 91 Park Avenue
yes tps will make your check engine light stay on..i had 89 park avenue stay on replaced tps and it went off and still off.i got 175000 mls.on it now and still runs great.3.8 and 3800 are good motors...good luck....
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|