 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Quality Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Pathfinder | Terrano | QX4 | Xterra | Patrol | Safari | X-Trail Nissans greatest 4WDs and SUVs |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
12-01-2006, 11:41 AM
|
#1 | |
|
AF Regular
 Join Date: May 2004
Location: birmingham, Alabama
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
|
resetting SES light w/o disconnecting the battery
How do you reset the SES light without disconnecting the battery? Seems like you can do a series of things from the drivers seat like "turn the key with the door open, wait 3 seconds, turn it off"...something like that. I've done it before but forgot what I did. 97 Pathfinder 4X4
|
|
|
|
|
12-04-2006, 07:34 AM
|
#2 | |
|
AF Enthusiast
 Join Date: Oct 2003
Posts: 525
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: resetting SES light w/o disconnecting the battery
Never heard of any way to turn off the light with the ignition. You do have a diagnostic mode selector screw on top of the ECU that can be used to blink the codes and erase them. You can probably find some past posts on that.
Why do you want to clear the light? If the problem is fixed that triggered the light it will go off on its own after enough drive cycles are completed with no errors.
__________________
1997 Pathfinder XE Air Lift Air Bags, Warn Hubs 2000 Windstar SEL |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
