|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Engine, Transmission and Drivetrain Discuss Engine, Transmission, Drivetrain, and all other performance modifications here. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
10-12-2006, 11:43 AM
|
||||
|
||||
|
Axles
I'm looking some axles...
I don't know what to buy... What will the stock one's handle? I'm looking to have a 16-20G on the car... and I don't wanna snap any... what's the best out there... for my money anyways... I don't wanna spend more than $300 for a set...
__________________
Quote:
1991 Eagle Talon TSI - Broken  Head removed, block broken, trans in hatch  1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end  Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq 
|
|
#2
10-12-2006, 02:19 PM
|
||||
|
||||
|
Re: Axles
Stock axles should be more than fine for a 16g-20g application.
They are rather inexpensive, I think like 50 bucks an axle, just make sure you get a left side and right side one, because IIRC they are slightly different length wise.
__________________
1991 GSX 2.3 Stroker
|
|
#3
10-12-2006, 02:21 PM
|
||||
|
||||
|
Re: Axles
ok, I just wanted to make sure... I think that auto parts warehouse has them the cheapest, coming in at a/b $68 a piece (or that's what I've been able to find)...
__________________
Quote:
1991 Eagle Talon TSI - Broken Head removed, block broken, trans in hatch 1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq
|
|
#4
10-12-2006, 02:28 PM
|
||||
|
||||
|
Re: Axles
Quote:
Sounds like a pretty solid deal. And worse case senario if you snap one, replacement isn't expensive. If you wanted to get more inexpensive axles, you could always go to a junkyard or find a DSM shop in your area, they probably have axles laying around that they would sell you for nothing.
__________________
1991 GSX 2.3 Stroker
|
|
#5
10-12-2006, 02:29 PM
|
||||
|
||||
|
Re: Axles
Thanks man...
__________________
Quote:
1991 Eagle Talon TSI - Broken Head removed, block broken, trans in hatch 1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq
|
|
#6
10-12-2006, 03:04 PM
|
||||
|
||||
|
Re: Axles
ok, one more question... are the axles the same between the NT and the turbo, how a/b the same between the AWD and the FWD, since I'm only looking front axles anywayz...
__________________
Quote:
1991 Eagle Talon TSI - Broken Head removed, block broken, trans in hatch 1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq
|
|
#7
10-12-2006, 03:11 PM
|
||||
|
||||
|
Re: Axles
Quote:
I'm pretty sure they are all unique. But don't quote me on that I'm not 100% sure. I just remember when I went and bought CV boots for my axles that I had to get the exact boot for my model. Wether that means that the boots are universal or are only limited to my model I don't know. I know the NT ones are different from the 4g63 ones for sure. Let me try and find out if the axles are different and I'll edit here and post what I find, just give me a few. After a little search It appears that the AWD axles are only unique to the AWD. So you'll have to get an axle for AWD cars. Also I found that with stock axles you should be good to about 400hp.
__________________
1991 GSX 2.3 Stroker
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
