|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-26-2002, 03:26 PM
|
||||
|
||||
|
Getting A B16!!!!!!!!!!
well you guys, i just ordered a b16.....i bought shifter linkage and mounts yesterday at my local ricer store (they actually had them in stock) soooo, anyone know where i can find a set of half shafts and a cpu? also...is there anything im forgetting?
__________________
94 Integra LS, autotragic, Tons of mods 93 Accord wagon, Manual conversion and f20b swap in the near future! 
|
|
#2
07-26-2002, 05:20 PM
|
|||
|
|||
|
hey good seeing you on nitto. finally saw another 4th genner on there.
if i were you i would spurge adn get a wiring harness. you didnt mention it. and you need one of those resistor boxes. you can try ebay for ecus idk of any place else
|
|
#3
07-27-2002, 01:39 AM
|
||||
|
||||
|
you need a rear bracket, clutch cable, upper and lower radiator hoses and maybe a 2nd o2(all from 91 teg except o2)
__________________
 AF Bay Area CrewFully Built LSVtec Motor (245.8 whp/164.6 torque) 88 DX Hatch to JDM SiR conversion Retired SOLD 1/08 Licensed Mortgage Consultant (Calif.) Cellular 415.699.1797
|
|
#4
07-27-2002, 03:19 AM
|
|||
|
|||
|
what rear bracket ? so the stock clutch cable out of the car doesnt work ?
hey ef_lsvtec, do you know what kind of throttle cable you need to use to swap a b16
|
|
#5
07-28-2002, 02:14 AM
|
||||
|
||||
|
Rear bracket that goes with the rear mounts...get one for 91 teg. Check out www.hasport.com for pics and more info. For the throttle cable, I used a 91 teg too, but I have a 97 LS and not a B16. The stock clutch cable is too short.
__________________
AF Bay Area CrewFully Built LSVtec Motor (245.8 whp/164.6 torque) 88 DX Hatch to JDM SiR conversion Retired SOLD 1/08 Licensed Mortgage Consultant (Calif.) Cellular 415.699.1797
|
|
#6
07-28-2002, 04:29 AM
|
||||
|
||||
|
You bought mounts from a ricer store??? What brand and how much?? Cause if you get a shitty brand of mounts, your car is gonna vibrate and rattle all the time.
As for Half shafts try raxles.com they can hook you up. You could even get the ecu from a junkyard. Although it should come with the engine and tranny.
__________________
 R.I.P. - You shall be resurrected. 
|
|
#7
07-28-2002, 07:57 AM
|
||||
|
||||
|
THE MOUNTS ARE HASPORT, MY FRIEND WORKS THERE AND I GOT THEM FOR 160
__________________
94 Integra LS, autotragic, Tons of mods 93 Accord wagon, Manual conversion and f20b swap in the near future!
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
