Re: 93 grand am back seats
Easy- Only two 13mm bolts to take out both seat pieces (back and seat) They are located about 12-18 inches from each side of the seat piece you sit on, underneath the seat by the carpet, and sunk in about 2 inches so as not to be seen... With a 3 inch extension and a 13mm socket; piece of cake. After the two bolts are out the seat pops off and the seat back piece just needs to be lifted up to remove- It has to be lifted vertically before pulled out because there are two wire hooks built into the back of it that secure it to the piece of sheet metal between the cabin and the trunk.
|
05-23-2006, 09:39 AM
