replacement of front/side turn signal lights (1993)

[guido0136]

Does any one know how to replace the front side turn signals. Not the ones under the front bumber, but the one that wrap around sides. Both of mine are out, and I can't, for the life of me, find as easy way to change these.

Any easy way?

Thanks.

[GregA]

Originally Posted by guido0136

Does any one know how to replace the front side turn signals. Not the ones under the front bumber, but the one that wrap around sides. Both of mine are out, and I can't, for the life of me, find as easy way to change these.

Any easy way?

Thanks.

Give the following page a look (about half-way down).

http://www.autozone.com/servlet/UiBr...3d801ef317.jsp

Take Care,

Hmmm, I only see rear lights on that link...I'm sure its in there somewhere but its pretty easy..There are 2 wing nuts on your headlight assembly. Remove these , pop out the headlites & you'll have easy access to the signal lenses...1 nut .
I'm scrapping a 93 if you need parts...new PCM..
Paul

[guido0136]

Okay, sounds easy enough, I'll give it a try.

Thanks.

[GregA]

I just remembered that I have some pictures of that area for my 2001 Venture. I don't know if they are similar to the 1993, but I thought I would give you the link anyway.

Turn Signal Assembly

Take Care,

[guido0136]

Thank you all for your help. I was able to change these this past weekend. I believe this takes much longer than it should, but I'm not a car builder.

Thanks.