|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Remote Control Cars Questions, comments or discussions on the wonderful little vehicles. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
04-23-2007, 08:56 AM
|
|||
|
|||
|
Need for Speed
Hello, Im new to the forum. I jsut purchased a HPI Sprint 2 with the Nascar truck body. Its a 4wd street car with a 17T Tornado for a motor. I dont really know what the number of turns means but Im looking for something faster. Can someone recommend a faster motor.
I used to race r/c cars about 17 years ago. I had the original alum body Team Assoc. RC-10, what a great car that was. However I havent had a r/c car since then and I really dont know anything about whats out there. 
|
|
#2
05-07-2007, 05:35 PM
|
|||
|
|||
|
Re: Need for Speed
Quote:
    the link is http://castlecreations.com. going brushless my be a little more but its a whole lot better in the long run. you will never have to worry about matinance again and you have crazy fast speeds. also look into gettin Li-Po or Li-Mn batterys for crazy power and long run times. hope this helps
__________________
real name:Nik i posted in yours now go post in mine 
|
|
#3
05-07-2007, 07:53 PM
|
||||
|
||||
|
Re: Need for Speed
Brushless is cool but very expensive..
For the price of a brushless setup you could buy a 3.3 traxxas 4tec and do 72mph OTB. But for people who don't like nitro brushless is the way to go
__________________
-Josh- 96' Integra GSR / ITR cams/valvetrain. Skunk2 IM, Greddy evo2, AEM CAI, RMF Header, Megan testpipe, Hasport mounts, Eibach coilovers, Beaks tie bar, Megan H brace, Rota Attacks, F/R strut bar, Kirk 6 point cage, Bride Cugas, Takata 4 Point, ITR Steering wheel 98' SVT Contour, 3L Port-Matched swap with SVT cams/full bolt ons; 224fwhp. 01' Chevy Blazer, DD.
|
|
#4
06-12-2007, 05:05 AM
|
||||
|
||||
|
Re: Need for Speed
I have to say brushless is the way to go in ly personal openion.. i have a nitro TC3 , nrushless stampede, and more, but between the two of those my brushless was not that expensive and a 5 minute install...it also beats the TC3 in a drag race to a 1/4 block distance... past that the nitro pulls past...it has 2gears and better transmitter to go further...
But like i was saying my stampede is a basic truck with the MAMBA 7700 BRUSHLESS, and some other upgrades and im verry happy with it! i wouldnt doubt if that truck can go 50mph easily!!! BTW... the 7700 mamba system costs about $210. depending where you look... and can be swapped to any 1/10 truck or car! so you can convert anything else you might buy to come! ------------------==madinker==----------------------
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
