|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
I am looking to remove all my emblems from my new 2003 S-10 Pick up
Can anyone help me out? Will i mess up the paint - are these all glued on or do I have like holes with points holding them on? Please let me know. Thanks for your help!!! |
|
#2
|
|||
|
|||
|
no
Its really easy. Got a heat gun and some wax? Comes in handy. Just take the heat gun and put it over the items you want to peal off, they are on the vehicle with some kind of glue. Once you get it a good deal warm you can dig into it a little bit with your finger and sort of nudge it until it peals off. Careful the piece will be still hot. Once you get it off you mind end up leaving some of the glue on the the truck, just get some wax and you can get it off.
__________________
'01 S-10 Xtreme - Supercharged 4.3L V6, 10 psi. '88 Firebird Trans Am GTA - 5.7L V8, 4spd auto. '06 GTO Brazen Orange Metallic - 6.0L V8, 6spd (the new toy/daily driver) |
|
#3
|
||||
|
||||
|
try a hair dryer. its not as much heat as a heat gun but just as effective...
its better to get them off now rather than waiting till they are 18 years old mike my truck yuck |
|
#4
|
|||
|
|||
|
Re: Removing Emblems from a 2003 S-10 Pickup
hair dryer and some dental floss tied to two sticks
pull through will come right off works for me |
|
#5
|
||||
|
||||
|
Re: Removing Emblems from a 2003 S-10 Pickup
First off make sure your truck is clean.Any dirt and you will scratch your paint.Apply heat with a blow dryer or heat gun.I then use a plastic scraper to peel the emblem off.Do not pry off emblem,if you do you will dent your truck.Then if any of the double sided tape remains on the truck just use your thumb to peel it off.Wax and your done.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|