|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
||||
|
||||
|
Losing torque at high RPM in 1st
Well......cars running great, but just one annoying thing. I was driving from a stop today and decided to push pretty hard, 1st gear has hardely any torque at all when it gets to high RPM's.......it hits second and jolts, like the high RPM's in first are holding the motor back. Its done this for a a long time,after I got the muffler.
After that, the torques great 2nd through 4th. It just seems high RPM in first gear really sucks.....anyone else with this issue in the 305's?
__________________
91 RS Camaro V8 305 TBI cold/ram 14"/3" open element K/N filter 3.73's B&M Megashifter 180 thermostat Flowtech TERMINATOR Exhaust 3" exhaust cutout Silvania Silverstar Headlights Ronal R15 Firehawk Wheels Hankook Ventus Sport (front) Sumitomo HTR+ (rear) 275/40ZR 17 all around... _____________________________ |
|
#2
|
||||
|
||||
|
Quote:
|
|
#3
|
||||
|
||||
|
Re: Losing torque in 1st
tranny could be slipping.....either the converter or the bands.....I dont see how the muffler could do anything. If anything it should help at high rpm. Unless your motor just isnt getting enough fuel...or maybe too much.....Maybe timing....
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers
|
|
#4
|
||||
|
||||
|
Re: Re: Losing torque in 1st
Quote:
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|