no spark

[ubergoose]

93 interga rs: the car was stolen (for the hood and dip stick) and apparently stopped by pulling 2 of the ignition wires.
i get no spark as confirmed by a spark tester/replaced the spark plugs and wires didn't help; engine cranks strong.
i have replaced the igniter & ignition switch wiring, everything else seems to check out, fuses, coil resistance, tdc sensor; got all of the right voltages at the right places. looked at the main relay box but it didn't look like the box opened up. battery was dead when i got the car back so all of the ecu codes are wiped.
called a shop to see if i could get the ecu checked out and was told only while its in the car.
would appreciate any type of suggestions.
thanks.

[WReX]

check your crankshaft position sensor

[ubergoose]

Originally Posted by WReX

check your crankshaft position sensor

WReX-
thanks for the input will check it

[WReX]

no problem

without that sensor hooked up or wired properly you won't get any spark on cyl. 1 due to no signal but you will still crank, just as you described