after market seat mounting

[n2it4sq]

This goes out to any of you all that have put in aftermarket seats.
I recently picked up a set sold through lite glow. The problem is with the generic sliders they provide. Anyone gone through the process of installing them. If so what should I look out for or whats the easiest route? I hate to learn things the hard way. Any advice would be appreciated.

Thanks

John

[Melt]

Try putting the sliders from your stock seats onto the SI seats. Should work fine then

[n2it4sq]

did not use si seats. The seats are street racer seats from lite glow.
The seat sliding brackets are also from lite glow.

[Melt]

Sorry, I didnt mean to say SI seats. I must have been reading a different post and got confused

[Tolowhb]

Hey man, i just got done putting some custom racing buckets in my civic it was a pain in the ass really. All i did was take the brackets off the stock seats (harder than it sonds) Then i took four piece of steel blanking and made like a square that hooked to the brackets, then i dabed a little paint on to the sliders of the new seats placed them on the steel blanks mounted to the brackets, took the seat away and drilled out the holes and then mounted the seats. VOILA! new seats! It was a pain but i figured if it was easy everyone would have them. If i didnt explain everything clearly enough let me know.