92 Lumina Euro Driver Door Panel Removal

[maui4me]

I've got a '92 Lumina Euro 4D Sedan with only 46k miles on it. I need to replace the driver's side mirror that has the cable on it (painter broke it off with a ladder). I picked up the complete mirror assy today at a junk yard for $35. For the life of me, I can't figure out how to remove the inside door panel. I've removed the screw at the door handle and all of the screws around the outside of the door panel. I can't get it to budge. I don't want to damage any clips or fasteners that I know must be holding it on.

Does anyone know the procedure to remove this panel? I can't seem to find any info on this anywhere on the internet, nor can I find any diagrams showing attachment point and so on. If anyone can be of help with this and anything I need to know about replacing the mirror, I'd really appreciate it! I'm trying to get the car ready to sell for Christmas money, so I need to take care of this fast. Thanks in advance!

[bleepster]

if its like any other door panel, it should be easy to come off.

the panel should be fastened to the door, via several small plastic fasteners. just use a straight blade screw driver and wedge it between the panel and the door, and pry it apart. they make a tool for this, but its not needed, in my opinion. replacement fasters are cheap, and can be bought at any auto part store. here is a link to what the fastners look like: http://www.partsexpress.com/pe/showd...number=265-905

like i said, it should be the same as some of the older doors i am use too.