|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-30-2005, 09:25 AM
|
||||
|
||||
teg master cyl in a crx ?
I did some research on here and foundout that i can swap in a 92 teg MC and booster, this will work on a 91crx dx? also is there any #'s too look for on the proportioner to know what make and model it came from or what the proportions are? and finally, my r/r brake pad seems to not pull back from the rotor cuz all i hear is it rubbing, the original caliper was replaced cuz it did this same thing but alot worse cuz i could be at a light on a hill with my foot off the brakes and sit still, replaced it and now it just makes that sound. could adjusting the e-brake again fix it or do i need to oil my e-brake cable? Any other suggestions would be nice if any1 has any. THANX GUYS!!
__________________
  The Evil Sleeper
|
|
#2
12-01-2005, 03:42 PM
|
||||
|
||||
|
Re: teg master cyl in a crx ?
yeah my buddy swapped integra MC and calipers and such onto his rex, stops on a dime now ^_^
__________________
Rest In Peace, Rich Hall my baby: 1986 Fiero GT: v6, automatic, 2.8L, 2.02/1.60 heads, Crane Performance Cam, Ported/polished exhaust manifolds, taylor plug wires, low temp thermostat and fan switch. WCF catback exhaust She's done! 
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
