|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-29-2005, 12:01 AM
|
|||
|
|||
96 jimmy heater core, do i really have to remove the dash?
hi all,
and thanks for this form. i need to replace my heater core in a 96 jimmy. i searched with the word "heater" and couldn't find any real answers. i'm hoping to find a step by step about changing it. some of the stuff i've read on the net says i DO have to remove the dash. some say that i DO NOT have to remove the dash. which is it? and of course it's 25 degrees out side and i have to scrape the inside of my windshield while i'm driving 
|
|
#2
11-29-2005, 06:16 AM
|
||||
|
||||
|
Re: 96 jimmy heater core, do i really have to remove the dash?
You do have to pull the dash out, not completely but a good 6-8 inches on the right hand side. You will also have a few screws on the cover in the engine compartment that will have to be removed as well.
__________________
  95 s10 Blazer, EGR Mod, ZQ8 Steering box mod, 99 Center console shifter mod and more... See everything at www.pghconsulting.net/teal
|
|
#3
11-29-2005, 06:21 AM
|
|||
|
|||
|
Re: 96 jimmy heater core, do i really have to remove the dash?
got any step by steps, or pics?
|
|
#4
11-29-2005, 06:43 AM
|
||||
|
||||
|
Re: Re: 96 jimmy heater core, do i really have to remove the dash?
Quote:
http://www.sytyarchives.com/howto/vi...imate_controls
__________________
95 s10 Blazer, EGR Mod, ZQ8 Steering box mod, 99 Center console shifter mod and more... See everything at www.pghconsulting.net/teal
|
|
#5
11-30-2005, 01:14 AM
|
|||
|
|||
|
problem fixed.
just wanted you all to know.
i thought i needed to fix my heater core because the air was blowing out cold. it was not the heater core. the electrical plug that controls the blend door was unplugged from the heater control head
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
