Keepin you updated on everything

RWK · 07-08-2006, 07:15 AM

Looks like I am going to end up buying a new fuel injector for my truck. that is about a 100-150 bucks. While I am doing that I am going to take the bed off and put a new fuel tank on it. Since I will have the bed off I will start sanding it and getting it ready to be painted. Plenty to keep me busy on this little project.

The truck is an 89 Chevy S10 Tahoe
2.5L 4 cylinder EFI

rlith · 07-08-2006, 07:31 AM

Good luck... Post pics of the final product!

RWK · 07-08-2006, 07:39 AM

Quote:

Originally Posted by rlith

Good luck... Post pics of the final product!

NO problem will definitely keep ya posted I am going to need luck with that fuel injector Hoping a new one will fix it. If it don't may decide to drop a v6 or v8 in it not sure yet I have one of each layin in the shop.

OverBoardProject · 07-09-2006, 02:03 AM

I don't know what your budget is but if you can possibly afford a compressor and a small sandblaster you'll wonder how you ever lived without it.

Make sure that it's a pressure feed sandblaster and not a suction feed or you'll be cursing and have wasted your money on it. I made that mistake the first time.

My present 1 is like this

RWK · 07-09-2006, 06:00 AM

What do they run price wise??
Have several vehicle I am gonna be working on

OverBoardProject · 07-09-2006, 11:26 AM

That 1 is about $140 here
http://www.northerntool.com/webapp/w...gory2_6970_109
Just check out your local area tool stores. I paid about 1/2 that through my local toy store for men (In Canadian funds)
The compressors are the expensive part. Truth is although it's too small for me I use a Coleman, that you can buy through Walmart. I've done more work that I can possibly remember with it and owned it for 4 years now. It's paid for it's self many times over. I use a 100 gallon piggyback tank (holding tank) for my bigger jobs.

The compressor usually comes with a few extra air tools, most are good for the money the paint gun is Junk.

RWK · 07-09-2006, 12:27 PM

Looks to be about 100 bucks down here not too bad It will save me alot of elbow grease. May look into it. I am gonna try and get the bed off this evening.

OverBoardProject · 07-09-2006, 12:37 PM

Here's some before the sandblasting

and after the sandblasting

pictures of 1 of my projects.
This ones on the backburner folks, my Blazers more important

kahjdh · 07-10-2006, 01:14 AM

You have a tahoe s10 w/ a 4cylinder? I thought those were all 4.3.....

Nasty_Nate · 07-10-2006, 01:59 AM

Quote:

Originally Posted by kahjdh

You have a tahoe s10 w/ a 4cylinder? I thought those were all 4.3.....

nah. They were only that way from '91 on. the 2.5 was the better motor to get, while we all know about the joke of a 6 cyl.

RWK · 07-12-2006, 02:27 PM

What is the joke b/c I hava 83 blazer with a 2.8 6 cylinder

RWK · 07-12-2006, 02:39 PM

Pics look good after blasting.I know how it is too get tired of working on one.Put the s 10 on back burner . I bought my wife an 84 ford bronco and she loves it. I know its a ford but she likes it. So I am working on it I have one question can the interior door panels be air brushed?? She wants them leopard print but she doesn't want material over the panel. I plan on buying new panels so they won"t have to deal with any imperfections. Thought I would ask to see if anyone knew

OverBoardProject · 07-12-2006, 02:45 PM

The 2.8L had one of Chevy's weakest bottom ends, so they're known as one of Chevy's all time worst motors.

They really improved in 86, and their next generation motors had all the bugs worked right out (the 3.1L and the 3.4L)

It sounds like you sandblasted it, Congrats! It must look good

RWK · 07-12-2006, 04:20 PM

I was talking about your pics of you coupe thst you sand blasted. I haven't bought a blaster yet it is on my list. I have 2 2.8 engines so hopefully they will be ok. The blazer is for my daughter I don't think she will be mudding too much. The engine will be ok for her I have another blazer that I plan on putting a 350 in My son wants to go ahead and keep the 4cylinder in his truck b/c better gas mileage He is getting ready to lower everything on it but I want to sand blast everything first. One project at a time rite now it is the bronco for a little while

OverBoardProject · 07-12-2006, 10:27 PM

Thanks

I've worked a fair amount with Fords, and prefer them, so if you need any advice feel free to ask.

I won't be involved with Automotive Forums much for the next while, so if you need to reach me please feel free to send me a private message. I'll be around just not posting.

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD