|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
09-26-2005, 12:02 AM
|
||||
|
||||
|
Full DA Integra Front/Rear Brake set-up
Master Cyl,40-40 Por. Valve,cables,hoses,knuckles,calipers,rotors,etc.
They are from a DA 91-93. Now my questions are, I know the rear disc will work but will these fit in with my SI axles? the front spindol(pass and drv), is it the same splines or would i have to keep my original? because i was just thinking of doing the whole set up DA front and rears. 
|
|
#2
09-26-2005, 12:48 AM
|
||||
|
||||
|
Re: Full DA Integra Front/Rear Brake set-up
yes the front axels will fit off the civic. Same spline count. The difference is the tranny side.
__________________
Mods: D16Z6 Turbo'd P28 ecu and Greddy emanage for fuel.  FWD tire smokerMy first Civic love Died from 92 year old Fart not watchin out.   
|
|
#3
09-26-2005, 04:09 PM
|
||||
|
||||
|
Re: Full DA Integra Front/Rear Brake set-up
so what do you mean the diffrence is on the tranny side? I have an SI tranny, so there shouldnt be a problem right? or is it that that the tranny has to be a diffrent one?
|
|
#4
09-28-2005, 10:29 PM
|
||||
|
||||
|
Re: Full DA Integra Front/Rear Brake set-up
the integra has a diffrent tranny spline count than out cars...it will work with your axels and tranny, i was going to do that swap myself but had money problems....
__________________
_________________________________http://VelocityFactor.com________________________________ 1990 si hatch b20b si tranny megan race header 2.5 custom exhaust 50 shot integra da rear disk (w/ 4040 valve) powerslot rotors and barded lines all around 1994 Dx hatch stock
|
|
#5
09-28-2005, 10:40 PM
|
|||
|
|||
|
Re: Full DA Integra Front/Rear Brake set-up
yes those axles will fit the da knuckles
|
|
#6
09-29-2005, 12:46 AM
|
||||
|
||||
|
Re: Full DA Integra Front/Rear Brake set-up
ok cool so the DA hubs will fit on a CRX and will fit in with the SI axles and will go along with the tranny as well...sweet thanks guys
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
