Change Oil Light and Low Water Light

[bblokey]

How can I reset my change oil indicator after getting an oil change?

And what can cause the Low Water Indicator to come on and off even when the water level is okay and it ain't over heating???

Please Help....

[Burnout524]

To reset the Change Oil Indicator, turn the key to the on position without starting the engine. Then press the gas pedal to the floor three times within five seconds. The light should blink and then you're all set.

As far as the water light problem, I'm not sure what to tell you. Go to an auto parts store and get the diagnostic codes. My guess is that its a bad sensor.

[bblokey]

Originally Posted by Burnout524

To reset the Change Oil Indicator, turn the key to the on position without starting the engine. Then press the gas pedal to the floor three times within five seconds. The light should blink and then you're all set.

As far as the water light problem, I'm not sure what to tell you. Go to an auto parts store and get the diagnostic codes. My guess is that its a bad sensor.

Thanks

[jy447]

to reset the change oil light:
- turn key to on position with out starting it

-press the gas pedel to the floor 3 times. (the change oil light should flash )

-turn key to off then start,it shoud be reset.