intake manifold

[cobradude360]

hey just took off my intake manifold today and just wondering if therewas any mods that i can do to the manifold or any part of the intake system? its a 1992 mgm LS 4.6 v8 the sig says it all
thanxs

[jimmytroanoke]

Originally Posted by cobradude360

hey just took off my intake manifold today and just wondering if therewas any mods that i can do to the manifold or any part of the intake system? its a 1992 mgm LS 4.6 v8 the sig says it all
thanxs

Don't know of any mods for this one other than changing the throttle body for a higher flow one. Don't know if that would do any good w/o other supporting mods. Take off the elbow and make sure your EGR passages are clean, as this is a common clog point. Why did you take it off. I am assuming to change the hose underneath. If not, change it. The new part from ford is only 30 bucks with new metal and the rubber already crimped on. Don't cut the rubber off your old one and try to clamp new rubber on. With the location of this hose it needs to be better than ordinary jobber heater hose.