 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
09-09-2005, 05:17 PM
|
#1 | |
|
AF Newbie
Join Date: Sep 2005
Location: Bakersfield, California
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
New on this board...
I have a Jeep J10. 360 cid. 4.11 Danas. 4WD. Can I adapt a 5 speed to this engine. Like a T-5. I need some lower rpm's for the highway. Any help would be apreciated.
|
|
|
|
|
09-11-2005, 10:11 PM
|
#2 | |
|
Nothing scares me anymore
 
Join Date: Dec 2003
Location: City of Light
Posts: 10,702
Thanks: 12
Thanked 82 Times in 77 Posts
|
Re: New on this board...
Yes, the T-5 was available in the early 80's on some 6 cyl Jeep CJ models, and will fit your V8.
A stock or mildly modified 360 is fine with a t-5. If yours is thoroughly modified, a T-5 will not be strong enough. You may need the matching transfer case, too. If you have a standard trans now, its an easy swap. If you have an auto, you would need to set up a clutch linkage and make sure the rear of the crankshaft had a pilot bushing. This bushing fitting is missing in most auto trans engines, so you need to look for it. |
|
|
|
|
|
09-14-2005, 09:19 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Sep 2005
Location: Bakersfield, California
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hey thanks....So an early 302 t-5. Change the transfer case too?
:smokin:sdsds:smile:
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
