|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-05-2005, 02:00 PM
|
|||
|
|||
|
Control Arm problems
in attempts to replace my front cross member, i came across a fairly bad problem. Taking of the left lower control arm is easy, but the right side sux. I tried removing the right LCA from two civic and both times the bolt seems to be attatched to the metal sleeve in the LCA bushing. So i get a SQUEEK everytime i loosen the bolt. And also the two metal slabs that the LCA rises into are bending out as i unscrew the bolt. Thats my best description of the problem. If anyone could give their two cetns thatd be great.
|
|
#2
03-05-2005, 05:15 PM
|
||||
|
||||
|
Re: Control Arm problems
Cut the bolt off and replace it with a Honda part. You may need to replace the LCA bushing as well, or even the whole control arm.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
