1998 Ford Ranger EVAP CODE BLUES

jwolfer · #1 03-08-2005, 05:14 PM

I have a 1998 Ford Ranger with dtc p0453 replaced pressure sensor in tank and still same code Can anyone help me.....

2000mudder · #2 03-11-2005, 10:05 AM

thereis no 453 code. there is a 443 witch i had and it was the diafram on the evap valve on drivers side fender. start from the engine with a can of carb cleaner spraying around vacume hoses and valves they connect to till motor revs up then you found your leak. the 443 code is a gross vacume leak somewhere.

jwolfer · #3 03-11-2005, 10:48 AM

Quote:

Originally Posted by 2000mudder

thereis no 453 code. there is a 443 witch i had and it was the diafram on the evap valve on drivers side fender. start from the engine with a can of carb cleaner spraying around vacume hoses and valves they connect to till motor revs up then you found your leak. the 443 code is a gross vacume leak somewhere.

There is a code 453, it is not very common, has to do with the FTP Sensor in the tank.. Found the problem was bad PCM Thanks for your help. I new the 443 code repairs the 453 through me!!!!!

2000mudder · #4 03-11-2005, 11:21 AM

sorry. i never seen that code anywhere. did u get your prob fixed?

jwolfer · #5 03-11-2005, 11:40 AM

yes bad computer(PCM)..

POST REPLY TO THIS THREAD