Indiglo Gauge face

[PoisonFangs]

[b][color=red]I am going to put im my indiglo gauge face but the gauge needles that are already on the car are red and i dont know if they will look ok or not. Do you guys have any pics of indiglo with red or whathaveyou. I need suggestions or ideas or whatever.

[fjt]

Here you go boy

Did you bought already your indiglos? Im selling mines...the same ones on the picture.

[PoisonFangs]

That looks badass man thanks. Sorry i already bought mine. Those are tight. I ran into a problem you may be able to help me with. My bezel(black thing around gauge inset with the 2 screws for those who dont know what it is ) will not come off HELP how did you get yours off.I have pulled and pushed and cried.

[iLLuCiv99]

yea the bezel or whatever is pretty damn hard to take out...well the first time anyway What I did was take the screws out and put the steering wheel down. the from the top, pull down and out. It should EVENTUALLY come out. Thats basically how I did it. Then the plastic cover part around the cluster has a few clips, I think 4. Good luck bro! post pics when you're done!!

[fjt]

Put your steering wheel all the way down. Remove the 2 screws that are at the top of the bezel. That cover is held by 2 pins at the back that are located at the lower corners of it. You have to pull hard one side at a time to release the pins. Pull hard but carefully. You'll hear a "Clack"!!! Don't worry you didn't broke anything, you just released the pins on the back.
Take out the bezel and look for the metal pins inside the dash and proceed to remove the cluster. To remove th bezel start from the top and then the sides.

When you put it back i recomend that you don't put the pins back, just in case you want to take out the bezel again. Just put the bezel back with the screws.

[PoisonFangs]

Thanks guys you kick ass. I will be sure to post the pics when im done.