|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Feb 2005
Location: Knoxville, Tennessee
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
I have a full size Blazer with a 350 in it. For the last month it will just die while driving. There seems to be no pattern. After it dies it will turn over, but not start for at least 24 hours. Then it seems fine and will run great for at least a week. I have checked and I am getting fuel to the trottle body and have replaced the ignition coil. Any thoughs?
|
|
|
|
|
|
|
#2 | |
|
AF -Advisor
![]() Join Date: Sep 2003
Location: Sudbury
Posts: 13,565
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: 94 k1500 Blazer dies
Check fuel pressure.
Done a tuneup?
__________________
1995 Factory Blazer Service Manual for sale, PM if interested. |
|
|
|
|
|
|
#3 | |
|
Problem?
![]() Join Date: Dec 2004
Location: Florida
Posts: 6,248
Thanks: 63
Thanked 114 Times in 94 Posts
|
Re: 94 k1500 Blazer dies
Check engine light on?
|
|
|
|
|
|
|
#4 | |
|
AF Newbie
Thread starter
Join Date: Feb 2005
Location: Knoxville, Tennessee
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
I am not getting a check engine light. I did a tune up about 6 months ago, cap, rotor, plugs, wires. What would cause the fuel pressure to drop? The fuel pump is a litle over a year old and I just changed the fuel filter.
|
|
|
|
|
|
|
#5 | |
|
AF -Advisor
![]() Join Date: Sep 2003
Location: Sudbury
Posts: 13,565
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: 94 k1500 Blazer dies
When it does and won't start, check if there is spark out of the plug wires.
__________________
1995 Factory Blazer Service Manual for sale, PM if interested. |
|
|
|
|
|
|
#6 | |
|
AF Newbie
![]() Join Date: Feb 2005
Location: bethlehem, Pennsylvania
Posts: 49
Thanks: 0
Thanked 0 Times in 0 Posts
|
blazer just dying
check the computer ground wire at the top radiator hose inlet neck on intake manifold. It should be a thin beige wire.
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|