 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
01-19-2005, 03:27 PM
|
#1 | |
|
AF Newbie
 Join Date: Nov 2004
Location: fargo, North Dakota
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
|
need brakes in front
what tools will I need, 94 metro hatch 1.0 liter
i plan on getting new rotors and pads, thanks |
|
|
|
|
01-19-2005, 04:15 PM
|
#2 | |
|
AF Enthusiast
 Join Date: Jul 2004
Location: Kansas City, Kansas
Posts: 183
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: need brakes in front
You will need a 12 mm wrench for the caliper but the rotor replacement requires a socket for the axle nut, a sldehammer, and a 12 mm socket and rachet. You must remove the hub since the rotor is bolted to it on the back side. You will see what I mean when you pull the wheel (I assume you know you need a lug wrench too
 ). If the rotors have good thickness and are not warped, I usually rough up the surface with some 40 grit to clean off the glaze and stick a set of pads on and go. You can usually rent the slide hammer from you auto parts store. |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
