|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Jan 2005
Location: Keyport, Washington
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
|
93 S-10 Blzr the 4x4 wont work
Ok here is the deal its a 93 4 door 4x4 S-10 Blazer 4.3L with a manual transfer case shifter. I have a hanes and chilton manual for it and they both are useless in this area. What I do know is the transfer case shifts and engages just fine in 4 Hi and LOW but I do not have vacuume to the accuater under the battery that engages the front differential.I have traced the vacuume lines back untill they disapear behind the bell housing. Where do those lines go? Any Ideas on where I should look next?
|
|
|
|
|
|
|
#2 | |
|
AF Enthusiast
![]() Join Date: Jan 2004
Location: Bensalem, Pennsylvania
Posts: 554
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 93 S-10 Blzr the 4x4 wont work
There is a three port vacuum switch on top of the transfer case. If it's plugged in, the switch is probably bad (very common). Before you replace it, you might want to check for vacuum to the switch.
|
|
|
|
|
|
|
#3 | ||
|
AF Newbie
Thread starter
Join Date: Jan 2005
Location: Keyport, Washington
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Re: 93 S-10 Blzr the 4x4 wont work
Quote:
|
||
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|