Gonna "Build-up" a Second Head w/I/H/E

[hankthehorrible]

I did this with my old MR2, and was very pleased with the results, had fun doing it - I/H/E and PP Head with Cams.

I like the performance and feel of the NA buld-up, and just gained the nerve to take on the project, again.

Need a little guidance on locating a used head for my 95DX. Also recomendation on cams, and location - regrind or new.

Thanks,

Henry

[snowman2005]

id do a mini swap and work off a z6 or y8 head from an ex.

[95dxcivic]

Originally Posted by snowman2005

id do a mini swap and work off a z6 or y8 head from an ex.

^^^^He's right^^^^ That d15b7 you have under the hood is not going impress you a tiny bit. Trust me. Do a d16z6 swap or use the d16z6 head. Or the y8 like he said.

[hankthehorrible]

Thanks for the advice.

I am still relatively unfamiliar with the Honda head options, and will research them.

What is the availability of the d16z6 head? and expected cost?

[snowman2005]

cost. if ur wanting to put it on ur dx ur goan need the ecu from the car the head came off so i should run anywhere from 150 to 300$ depending on the condition. u maight be abole to get it for less. go to www.honda-tech.com and do a searh for mini me swap lots of info.