|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-14-2008, 08:55 AM
|
|||
|
|||
|
3.1 Litre Oil Pump Shaft O-ring
HELLO TO ALL:
DO ANY OF YOU HAVE THE EXACT PART NUMBER FOR THE ABOVE? I ASK AS I WAS SOLD THE INCORRECT PART BY A DEALER. THIS IS NOT THE FIRST TIME THIS SORT OF THING HAS OCCURED WITH THIS ENTERPRISE. SO I AM DONE WITH THEM AT THIS POINT. ANY GUIDANCE HERE WOULD BE GREATLY APPRECIATED. THANK YOU AND REGARDS, FISH96 P.S. ANY AFTERMARKET PART NUMBER WOULD BE FINE ALSO, i.e.VICTOR, FEL PRO, HELP, etc. 
|
|
#2
05-26-2008, 03:00 AM
|
|||
|
|||
|
Re: 3.1 Litre Oil Pump Shaft O-ring
i would try napa online and see if you can find one that matches. good luck.
__________________
Certified Mechanic 9 years experience Auto Business Owner
|
|
#3
06-04-2008, 12:22 PM
|
|||
|
|||
|
Re: 3.1 Litre Oil Pump Shaft O-ring
|
|
#4
06-04-2008, 03:04 PM
|
|||
|
|||
|
Re: 3.1 Litre Oil Pump Shaft O-ring
Looks like it, but how can a picture determine the proper size. why not match the old one up at a parts house. Also in the future post the year of the car.
__________________
|
|
#5
06-04-2008, 03:25 PM
|
|||
|
|||
|
Re: 3.1 Litre Oil Pump Shaft O-ring
Thank You All For The Assistance, 2002 Malibu 3.1 Litre Vin J.
At Least I Now Have A Part Number; Yes It Is Different Than The One I Was Given. The O-rings I Have Seen At The Local Parts Store Do Not Appear To Be Made Of The Proper Material, Which I Believe Is Viton (hi-temp Resist. 400f.) Regards, Fish96
|
|
#7
06-05-2008, 06:29 AM
|
|||
|
|||
|
Re: 3.1 Litre Oil Pump Shaft O-ring
Thanking You All Again For The Most Learned Assistance. I Have Planned To Place Fiber Gasket Fel Pro #70194 With A Slight Coating Of Rtv Silicone On The Block Sealing Surface Of The Shaft.
Regards, Fish96
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
