 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
05-04-2004, 04:52 PM
|
#1 | |
|
AF Newbie
Join Date: May 2004
Location: san diego, California
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Writeup for 6" Fabtech Lift on 2000 V6 3.4L Prerunner?
I've searched all over the internet. Does anyone have a writeup for the installation of the 6" Fabtech Lift on a PreRunner? It was designed for the 4x4. But it WILL work... you just use less parts. =)
Thanks in advance, Brian |
|
|
|
|
06-07-2004, 09:26 PM
|
#2 | |
|
AF Newbie
Join Date: May 2004
Location: walnut, California
Posts: 22
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Writeup for 6" Fabtech Lift on 2000 V6 3.4L Prerunner?
yo whats up Brain. i've been really hesitant on lifting my '04 prerunner 3.4v6trd and i want to also use the 6" fabtech (only for 4x4,) but half the shops i call say yes and no i will and will not fit. I just want to know from your experience, what will be needed from the kit and what parts wont be needed so i can school some of this shops. thanks man.
__________________
i'd rather drive a toyota |
|
|
|
|
|
06-15-2004, 05:19 AM
|
#3 | |
|
AF Newbie
 Join Date: Jan 2004
Location: san antonio, Texas
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
|
Fabtech makes a 6" lift for the 2wd tacos that runs about $1000-1100. Much cheaper than the one designed for the 4wd model.
|
|
|
|
|
|
11-18-2004, 09:24 AM
|
#4 | |
|
AF Newbie
Join Date: Nov 2004
Location: fuquay-varina, North Carolina
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Writeup for 6" Fabtech Lift on 2000 V6 3.4L Prerunner?
i have a 03 pre runner. I put on a 5" tuff country lift.I looked at the fabtech.fabtech says it wont fit.
so i didnt even try. i have 305/70/16 m/t's on m/t classic II. its only one inch difference. |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
