 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
10-20-2004, 09:50 AM
|
#1 | |
|
AF Newbie
 Join Date: Oct 2004
Location: None
Posts: 43
Thanks: 0
Thanked 0 Times in 0 Posts
|
Here's another 02 Blazer question.
How do you replace a burnt out light in the door lock switch? Do you have to replace the whole switch or just a bulb. In either case, is there a special tool to remove the wire connectors?
|
|
|
|
|
10-20-2004, 01:49 PM
|
#2 | |
|
AF Regular
 Join Date: Sep 2004
Location: Poughkeepsie, New York
Posts: 186
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Here's another 02 Blazer question.
You should be able to carefully pry up on the front edge of the switch plate, and then slide the assembly foreward and lift to see what the parts look like. GM does make an electrical connector removal tool,not sure of the part number. You should be able to use a small flat tip screwdriver to gently pry back the plastic retainer to remove the connector. PS. Disconnect neg batt terminal before working on electrical components. Hope this helps.
|
|
|
|
|
|
10-20-2004, 02:33 PM
|
#3 | |
|
AF Regular
Join Date: Sep 2004
Location: Poughkeepsie, New York
Posts: 186
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Here's another 02 Blazer question.
Lisle makes an electrical connector seperator Part #13120
|
|
|
|
|
|
10-20-2004, 02:46 PM
|
#4 | |
|
AF Newbie
Join Date: Oct 2004
Location: None
Posts: 43
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Here's another 02 Blazer question.
Thanks for the info. Any ideas on if you can change just a bulb or the whole switch?
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
