what size torx bit do i use? 2003 Dodge Caravan

[deman123]

i need to know what size of trox bit i should use to remove the calipers on my 2003 dodge caravan so i can replace the brake pads?

[GTP Dad]

Try a T-45 bit. That should work.

[Mark3316]

My method, although not impressive, almost always works: I try one size, and if that one isn't a good fit, I try another.

[Rhcmlc]

I changed the front pads on my Caravan a couple of months ago and the T-45 torx bit fit perfectly.

[mike2004tct]

Originally Posted by Mark3316

My method, although not impressive, almost always works: I try one size, and if that one isn't a good fit, I try another.

The same method I use.
Went to Napa a few years back and bought one of the bit-kits in a rubber sleeve. 12 different sizes that fit in a 1/4" and 3/8" ratchet drive.

[djmarxx]

I just replaced my front brake pads, and my van has 12mm bolts, not torx bolts. Thats wierd.