Let's Get Something Started

[k3smostwanted]

hey guys....i am just trying to get something started in this forum. it seems to be dead.

what are your guys future plans for your 350z's? performance or visual??? tell us all about your projects.

[350G]

Once I get the Greddy TT up and running (today), I'm going to venture where only a few have: standalone ecu. Once I get that figured out (if ever ), it's off to install my rods, pistons, & head studs. Anything else requires the winning lotto numbers

[k3smostwanted]

sounds good to me. are you doing all the labor and what not yourself? are you the only one with the greddy TT kit on this forum that you know of? get some personal times and specs on here as soon as you get that thing moving. i think we all would be interested

[2003_350z_Touring]

i got all sorts of plans but no cash...i got champagne taste on a beer budget...here it is...

1. crawford cats
2. injen ses exhaust
3. unorthodx racing ultra ss pulley set
3.5 hawk brake pads
4. crawford plenum and strut bar
5. 350evo throttle body
6. 350evo 3.917 final drive
7. nismo lsd
8. nismo thermostat
9. nismo flywheel
10. nismo rims
11. nismo sway bars
12. nismo springs
then way down the line...i would like to go with a twin turbo setup...and then even farther down the line i would like to get the AEBS 4.3l stroker kit...

i think thats the preliminary list....hi i'm mike..and i'm an addict

[350G]

That's an impressive list If TT or the stroker kit seem obtainable, I'd target those two first. If I had to do it all over again, I may have done the stroker kit first, then TT in a few years, but hey, you can't argue with 350-400whp.

[2003_350z_Touring]

you definately cant argue with that..my main problem is that the only thing that is impressive about my car...is the list of future plans...all i got now is an intake...i got a long way to go

[350G]

It doesn't take long . . . I've accomplished all my customizations in about a year . . . and a little more debt

[Amril]

If you actually go through with the standalone ECU go for the AEM 'cause it's supposed to be easily programmable

And my wishlist
Actually get a 350Z
nismo cold air intake
nismo crankshaft
nismo forged pistons
nismo swaybars
C-west body kit
C-west CF wing
Top Secret Coilovers (circuit with electronic control)
Top Secret 8 piston calipers (front) 4 (back) cross drilled and slotted 14 inch rotors
Brembo brake pads
Steel Braided brake lines
Top Secret Titanium headers
10% black window tint
Either Greddy TT or make my own with HKS turbo's
Stillen (?) cat back exhaust (is straight through without the large mufflery thing)
nismo Limited Slip Differential Clutch
AEM standalone Engine Management Unit
Bridgestone Z type tires
Blitz 1000cc injectors
Nismo strut tower bars
Veilside 100mm Inlet Manifold
Turbo timer
HKS Blow-off valves
Port and Polish headers
Blueprint engine block
Volks racing wheels (don't know which ones though )

As you can see I have a lot of time on my hands

[350G]

I've heard that AEM doesn't have any intention to do one for the "foreseeable future." Someone is already working on the HKS F Con, so I'm letting him work out the bugs

G

[otter7467]

Installed so far
AEM CAI intake (doesn't do much )
HKS Camp going on tomorrow (can't wait to raise my fish )
Kenwood TV/DVD
Kicker 10 (tomorrow)
Kicker 350.2 amp (tomorrow)
Enkei RPF1 18x8.5 front (245) 18x 9.5 rear (275)

Planned
Nismo flywheel (bidding on it now on ebay)
different clutch (any ideas) (summer 05)
Stroker kit
Greddy kit (larger injectors, turbo timer, etc.) (summer or fall 05)
Nismo LSD
Fiber images CF body kit & maybe a hood preferably like the JGTC car
Sparco seats
Tein coilovers
Greddy Evo 2 exhaust or the Injen one (summer 05)
test pipes (summer 05)
Big Brake kit front & rear (fall 05)
sway bars undecided on brand (Christmas from the gf)

and of course some 24 inch spinners lol

[Amril]

you could always use the carbon clutch igor has on the AF Z

[otter7467]

Got the flywheel and a word of advice make sure if you get a camp you get one from a authorized dealer or it will be in japanese. lol.

Amril do you know what the cost for the carbon clutch.

[Amril]

I'd say around 1k-1.5k. If you want it accurately jsut ask Igor on the AF350Z forum

[otter7467]

I got the Camp on it's fun to play with nothing special but it is fun at least for now. What i was wondering is if anyone has put a different flywheel on their Z and if so is it something i can do myself or should i get a shop to do it. (called the dealership out of curiousity and they wanted $885 to put it on. needless to say i didn't make an apointment)