|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-24-2004, 05:04 PM
|
|||
|
|||
Taking off the warning lables on ATV's
I was wonderin how i can take off those stupid labels that are on atv's
__________________
I get asked why i drive a honda and i say...... Cause its faster than yours 
|
|
#2
07-27-2004, 05:13 PM
|
||||
|
||||
|
Re: Taking off the warning lables on ATV's
its hard because if you use chemicals (gas,thinner) they will dull the plastics and if your not careful with a scraper you will chip and scratch the shit out of your plastics. At the Auto parts store they sell a cleaner for Stickers and Decals, or you can buy replacement aftermarket plastics that come without the labels and those stupid indents (for the labels). I havent touched the ones on my LTZ because I dont want it to look like crap where the labels once were.
-Jimmy
__________________
~99' Silverado z71 LS 5.3~
Alpine CDA-9830 Head Unit 2-JLW12 Subs Infinity Surrounds Too Many Extras 04' Yamaha YZF R6 Super Sport~ Liquid Silver with Black Ghost flames K&N Filter, Fender Delete Kit Aftermarket Mirror Shield Devil Carbon Fiber High Mount Pipe Power Commander III 02' Subaru WRX Turbo Sport Wagon Eibach Springs, Short Throw Shifter 17" Versus Campionato Wheels Wrapped in Pirrelli tires
|
|
#3
07-29-2004, 07:18 PM
|
|||
|
|||
|
Re: Taking off the warning lables on ATV's
The ones that are on my blaster are rivited and thats what i was talkin bout i dont know of any with just a sticker and im good with a razor blade so i dont scratch stuff.
__________________
I get asked why i drive a honda and i say...... Cause its faster than yours
|
|
#4
08-12-2004, 12:59 AM
|
|||
|
|||
|
Re: Taking off the warning lables on ATV's
With the stickers, simply use a heat gun or hairdryer, using as little heat as possible so it doesn't melt the plastic!!
If you want to take out the rivets, use a drill to drill them out. Just use a bit that is about the same size as the head of the rivet.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
